Technical Specifications
| Air Consumption | 6–12 m³/min |
| Drilling Diameter | 90–150 mm |
| DTH Hammer | Optional |
| Drilling Depth | 10–60 m |
| Drill Rod Size | Ø60 × 1000 mm / Ø76 × 1000 mm |
| Maximum Output Torque | 1,800 N·m |
| Maximum Feed Stroke | 1,200 mm |
| Maximum Pullback Force | 80 kN |
| Maximum Feed Force | 60 kN |
| Rated Hydraulic System Pressure | 16 MPa |
| Motor Power | 11 kW |
| Total Rig Weight | 400 kg |
| Rotation Speed | 0–80 rpm |
| Feed Unit Tilting Angle | 10°–90° |
Hydraulic Drilling Configuration & Key Features
Hydraulic Rotation and Feed System
The TD-RIG-ANC-001 features a hydraulic rotation and feed system powered by an 11 kW motor. Its rated hydraulic system pressure is 16 MPa, with an adjustable rotation speed of 0–80 rpm and a maximum output torque of 1,800 N·m.
Feed and Pullback Capacity
The rig provides a maximum feed force of 60 kN and a maximum pullback force of 80 kN. These specifications are relevant when evaluating the equipment’s suitability for anchor drilling operations and selecting compatible drilling tools.
Short-Version Feed Configuration
The short-version configuration has a maximum feed stroke of 1,200 mm and supports Ø60 × 1000 mm and Ø76 × 1000 mm drill rods. Compared with the long-version model, it uses a shorter feed stroke and shorter specified drill rod lengths.
Drilling Diameter and Depth
The published specifications list a drilling diameter range of 90–150 mm and a drilling depth range of 10–60 m. Actual drilling performance depends on ground conditions, drilling tools, and the selected operating configuration.
Adjustable Feed Unit
The feed unit has a specified tilting angle range of 10°–90°, allowing its position to be adjusted according to the required drilling orientation and site setup.
Optional DTH Hammer Configuration
A DTH hammer is listed as optional equipment. Hammer selection, drill rod connections, and compressed-air requirements should be confirmed according to the intended drilling diameter and operating conditions.
Anchor Drilling Applications & Operating Requirements
Anchor Borehole Drilling
The TD-RIG-ANC-001 is designed for anchor drilling operations requiring controlled hydraulic rotation and feed. Its published drilling diameter range of 90–150 mm and drilling depth range of 10–60 m provide reference parameters for evaluating the rig against project borehole requirements.
Drilling at Different Inclinations
The feed unit offers a specified tilting angle range of 10°–90°, allowing the drilling assembly to be positioned for different borehole orientations. The suitability of a particular drilling angle depends on the site layout, equipment setup, and required drilling direction.
Short-Feed Drilling Configuration
With a maximum feed stroke of 1,200 mm, the short-version rig supports Ø60 × 1000 mm and Ø76 × 1000 mm drill rods. This configuration can be considered where shorter rod sections are appropriate for the drilling procedure and available working space. Site clearance and operating requirements should be checked before equipment selection.
Drilling Tool and Air Supply Selection
A DTH hammer is available as optional equipment, with a specified air consumption range of 6–12 m³/min. Hammer selection, drill rod compatibility, and compressor requirements should be confirmed according to the borehole diameter, ground conditions, and intended drilling method.
Project and Equipment Selection Considerations
Before selecting the TD-RIG-ANC-001, buyers should confirm the required drilling diameter and depth, ground conditions, borehole orientation, available working space, and drilling tool configuration. The rig’s 11 kW motor, 1,800 N·m maximum output torque, 60 kN maximum feed force, and 80 kN maximum pullback force should be evaluated together with the project requirements.
Frequently Asked Questions
01What drilling diameter and depth does the TD-RIG-ANC-001 support?
The TD-RIG-ANC-001 has a specified drilling diameter range of 90–150 mm and a drilling depth range of 10–60 m. Actual drilling performance depends on ground conditions, drilling tools, and the selected operating configuration.
02What is the difference between the short-version and long-version anchor drilling rigs?
The short-version TD-RIG-ANC-001 has an 11 kW motor, a maximum feed stroke of 1,200 mm, and supports 1,000 mm drill rods. The corresponding long-version configuration has a 15 kW motor, a maximum feed stroke of 1,800 mm, and supports 1,500 mm drill rods. Both versions have a specified maximum output torque of 1,800 N·m. The appropriate configuration should be selected according to drilling requirements, rod handling, and available working space.
03What are the maximum feed and pullback forces of this rig?
The TD-RIG-ANC-001 has a specified maximum feed force of 60 kN and a maximum pullback force of 80 kN. These values describe the equipment’s rated force capabilities and should be evaluated alongside the drilling method, ground conditions, and selected drilling tools.
04Can the TD-RIG-ANC-001 be equipped with a DTH hammer?
Yes. The manufacturer’s specifications list the DTH hammer as optional equipment and specify an air consumption range of 6–12 m³/min. The appropriate hammer model, operating air pressure, compressor capacity, and drill rod connections should be confirmed before ordering. The DTH hammer is not listed as standard equipment.
05What information should I provide when requesting a quotation for the TD-RIG-ANC-001?
Please provide the required borehole diameter and depth, ground conditions, drilling inclination, available working space, and preferred drill rod size. If DTH drilling is required, include any available information about the hammer and compressed-air supply. Also specify whether you need drilling tools or accessories with the rig so that the proposed configuration can be reviewed before quotation.
Related Products
Start Your Project
Connect with TitanDrill engineering experts for custom technical configurations and global quote response.