Product Category

DTH Drill Bits for Down-the-Hole Drilling

Explore TitanDrill DTH drill bits for down-the-hole drilling, with options for different hole requirements, rock conditions and compatible DTH hammer shank interfaces.

Request a QuoteBrowse Products

Category Overview

DTH bits are the rock-cutting components used at the bottom of a down-the-hole drilling assembly. Connected directly to the DTH hammer, the bit receives repeated impact energy from the hammer and transfers it to the rock through tungsten carbide buttons while rotation helps distribute the cutting action across the hole face.

A DTH bit must be selected as part of a compatible hammer-and-bit combination. The bit shank needs to match the hammer interface, while bit diameter, face design, button configuration and other design characteristics should be considered according to the required hole size, rock conditions and drilling requirements. Selecting a bit by diameter alone may result in an incompatible or unsuitable tooling combination.

TitanDrill supplies DTH bits for different DTH hammer systems and drilling requirements. Available configurations can vary by shank family, bit diameter, face design and button arrangement. When replacing an existing bit, the hammer model or current bit shank information can be used to help identify compatible options.

DTH bits are commonly used together with DTH hammers and drill pipes in drilling operations such as mining and quarrying, water well drilling, geothermal drilling and other projects where down-the-hole drilling is applied. Product selection should therefore consider both the physical compatibility of the bit with the hammer and the operating conditions of the drilling project.

Available Products

Browse available TitanDrill products under this category.

No products available yet.

This category is ready for future TitanDrill product uploads.

Contact TitanDrill

Selecting the Right DTH Bit for Your Hammer and Drilling Conditions

Choosing a DTH bit involves more than matching the required hole diameter. The bit must use a shank configuration compatible with the DTH hammer, while face design, button arrangement and other bit characteristics should be considered in relation to rock conditions and drilling requirements.

When replacing an existing bit, providing the hammer model, current bit model or shank type, required hole diameter and rock conditions can help narrow down compatible options. For a new drilling setup, TitanDrill can assist with coordinating the DTH bit and hammer selection based on the available equipment and project information.

Buying Guide

Start with the Required Hole Diameter

The required hole diameter is one of the first factors to establish when selecting a DTH bit. It helps narrow down the appropriate bit size and the range of DTH hammers that may be considered for the drilling setup. The final selection should still account for hammer compatibility and operating conditions rather than diameter alone.

Match the Bit Shank to the DTH Hammer

The bit shank must be compatible with the selected DTH hammer. Different hammer systems use different shank configurations, so bits with a similar diameter are not necessarily interchangeable. When replacing an existing bit, provide the hammer model, current bit model or shank information whenever possible.

Consider Rock Conditions

Rock hardness, abrasiveness, fracturing and other formation characteristics can influence DTH bit selection. These conditions should be considered when evaluating the bit configuration and carbide button arrangement for a particular drilling project. If the formation varies significantly, provide information about the expected range of rock conditions when requesting a recommendation.

Consider Bit Face and Button Configuration

DTH bits are available with different face designs and button configurations. These design characteristics affect how the bit interacts with the rock and should be evaluated together with hole diameter, rock conditions and the hammer being used. The appropriate configuration therefore depends on the overall drilling requirement rather than a single product feature.

Check the Complete Hammer-and-Bit Combination

A DTH bit should not be selected independently from the hammer. Confirm the hammer model or shank interface, required bit diameter and other relevant tooling information before ordering. For a new drilling setup, the available rig and air supply should also be considered when determining the overall DTH tooling combination.

Information to Provide When Requesting a Recommendation

To help TitanDrill identify suitable DTH bit options, provide as much of the following information as available:

  • Required hole diameter
  • Rock type or general rock conditions
  • DTH hammer brand and model
  • Existing bit model or shank type
  • Drilling depth
  • Drill rig brand and model
  • Air compressor capacity or operating parameters
  • Current tooling specifications or photos, if available
  • Intended drilling application

You do not need to have every specification confirmed before contacting TitanDrill. Existing product markings, equipment information, drawings or photos can also help narrow down compatible DTH bit options.

Related Product Categories

Continue exploring related TitanDrill product categories within the same product family.

DTH Drill Pipes

DTH drill pipes designed for reliable air delivery, torque transmission, and connection between the drill rig and DTH hammer.

View Category

DTH Hammers

DTH hammers for down-the-hole drilling, with options for different hole requirements, drilling conditions and hammer-bit interface systems.

View Category

Related Drilling Methods

Explore the drilling method associated with DTH bits and understand how the bit works as part of the complete drilling system.

DTH Drilling

DTH Drilling

A powerful drilling method for deep exploration applications, providing efficient penetration and reliable performance in hard rock formations where accurate borehole construction…

Learn More →

Learn how DTH bits work with DTH hammers and drill pipes within the down-the-hole drilling method.

Related Applications

Explore drilling applications where DTH bits may be used and see how bit selection can vary with rock conditions, hole requirements and operating environments.

Mining & Quarrying

Hard rock drilling solutions for mining and quarrying projects requiring reliable penetration, durable tooling and consistent drilling performance in demanding geological conditions.

Explore Application →

Explore applications where DTH bits are used and understand how hole requirements, rock conditions and drilling environments can influence product selection.

Frequently Asked Questions

The DTH bit must use a shank configuration compatible with the hammer. If you already have a DTH hammer, provide the hammer brand and model, current bit model, shank information or clear photos of the existing tooling. TitanDrill can use this information to help identify compatible DTH bit options.

No. Hole diameter is an important starting point, but the bit must also be compatible with the DTH hammer. Rock conditions, bit face design, button configuration and the overall drilling setup should also be considered when selecting a suitable DTH bit.

Rock hardness, abrasiveness, fracturing and other formation characteristics can influence the appropriate bit configuration. Providing information about the expected rock conditions helps narrow down suitable options together with the required hole diameter and hammer configuration.

Provide the required hole diameter, DTH hammer brand and model, existing bit model or shank type, rock conditions and intended drilling application where available. Drill rig information, drilling depth, air compressor parameters, product markings, drawings or photos can also help when compatibility needs to be confirmed.

Yes. If you provide the existing hammer or bit model, shank information, required diameter and available equipment details, TitanDrill can help narrow down compatible replacement options. Photos of product markings or the existing tooling can also be useful when the exact specification is not known.

Need Help Choosing the Right DTH Bit?

Share your required hole diameter, hammer model, rock conditions and available tooling information. TitanDrill can help identify compatible DTH bit options for your drilling requirements.

Request A Quote