Technical Specifications
| Air Consumption | 6–12 m³/min |
| Drilling Diameter | 90–200 mm |
| DTH Hammer | Optional |
| Drilling Depth | 10–60 m |
| Drill Rod Size | Ø76 × 1500 mm / Ø89 × 1500 mm |
| Maximum Output Torque | 3,000 N·m |
| Maximum Feed Stroke | 1,800 mm |
| Maximum Pullback Force | 50 kN |
| Maximum Feed Force | 30 kN |
| Rated Hydraulic System Pressure | 16 MPa |
| Motor Power | 15 kW |
| Total Rig Weight | 700 kg |
| Rotation Speed | 0–60 rpm |
| Feed Unit Tilting Angle | 10°–90° |
Hydraulic Drilling Configuration & Key Features
Hydraulic Rotation and Feed System
The TD-RIG-ANC-003 features a single-motor hydraulic drilling configuration with a 15 kW motor and a rated hydraulic system pressure of 16 MPa. The rotation system provides a maximum output torque of 3,000 N·m and an adjustable rotation speed of 0–60 rpm.
Drilling Diameter and Depth
The published specifications list a drilling diameter range of 90–200 mm and a drilling depth range of 10–60 m. Compared with the TD-RIG-ANC-001 and TD-RIG-ANC-002 configurations, this model has a higher specified maximum drilling diameter, while actual drilling performance remains dependent on ground conditions, drilling tools, and the selected operating configuration.
Drill Rod Configuration
The rig supports Ø76 × 1500 mm and Ø89 × 1500 mm drill rods. These specified rod sizes should be considered when selecting compatible drilling tools, connections, and optional DTH hammer equipment.
Feed and Pullback System
The TD-RIG-ANC-003 provides a maximum feed stroke of 1,800 mm, a maximum feed force of 30 kN, and a maximum pullback force of 50 kN. These ratings should be evaluated together with the required drilling method, borehole conditions, and drill string configuration.
Adjustable Feed Unit
The feed unit has a specified tilting angle range of 10°–90°, allowing the drilling assembly to be positioned according to the required drilling orientation and equipment setup.
Optional DTH Hammer Configuration
A DTH hammer is listed as optional equipment, with a specified air consumption range of 6–12 m³/min. Hammer compatibility, drill rod connections, operating air pressure, and compressor requirements should be confirmed according to the intended drilling diameter and ground conditions.
Anchor Drilling Applications & Operating Requirements
Anchor Borehole Drilling
The TD-RIG-ANC-003 is designed for anchor drilling operations requiring hydraulic rotation and feed. Its specified drilling diameter range of 90–200 mm and drilling depth range of 10–60 m provide reference parameters for evaluating the rig against project borehole requirements. Actual drilling performance depends on ground conditions, drilling tools, and the selected operating configuration.
Drilling Tool and Rotation Configuration
With a maximum output torque of 3,000 N·m and an adjustable rotation speed of 0–60 rpm, the rig provides a hydraulic rotation configuration for anchor drilling operations. It supports Ø76 × 1500 mm and Ø89 × 1500 mm drill rods. Drill rod connections and tool compatibility should be confirmed according to the required drilling method and borehole dimensions.
Drilling at Different Inclinations
The feed unit has a specified tilting angle range of 10°–90°, allowing the drilling assembly to be positioned for different borehole orientations. The required drilling inclination, installation position, and available working space should be reviewed before equipment selection.
Optional DTH Drilling Configuration
A DTH hammer is listed as optional equipment, with a specified air consumption range of 6–12 m³/min. Buyers considering DTH drilling should confirm the hammer model, operating air pressure, compressor capacity, and compatibility with the selected drill rods. The optional DTH configuration should be evaluated against the intended ground conditions and drilling requirements.
Project and Equipment Selection Considerations
Before selecting the TD-RIG-ANC-003, buyers should provide the required drilling diameter and depth, ground conditions, drilling inclination, available working space, and preferred drill rod size. The rig’s 15 kW motor, 3,000 N·m maximum output torque, 1,800 mm maximum feed stroke, 30 kN maximum feed force, and 50 kN maximum pullback force should be evaluated together with these requirements.
Frequently Asked Questions
01What drilling diameter and depth does the TD-RIG-ANC-003 support?
The TD-RIG-ANC-003 has a specified drilling diameter range of 90–200 mm and a drilling depth range of 10–60 m. These values are based on the manufacturer’s published specifications. Actual drilling performance depends on ground conditions, drilling tools, and the selected operating configuration.
02How does the TD-RIG-ANC-003 differ from the TD-RIG-ANC-001 and TD-RIG-ANC-002?
The TD-RIG-ANC-003 has a maximum output torque of 3,000 N·m and a specified drilling diameter range of 90–200 mm, compared with 1,800 N·m and 90–150 mm for the TD-RIG-ANC-001 and TD-RIG-ANC-002. It also supports Ø76 × 1500 mm and Ø89 × 1500 mm drill rods. However, its maximum feed force and pullback force are lower than those of the other two models. Equipment selection should consider all relevant specifications rather than maximum torque alone.
03What are the feed and pullback force specifications of the TD-RIG-ANC-003?
The TD-RIG-ANC-003 has a specified maximum feed force of 30 kN and a maximum pullback force of 50 kN, with a maximum feed stroke of 1,800 mm. These values should be evaluated together with the drilling method, drill string configuration, and ground conditions when selecting equipment for a project.
04Can the TD-RIG-ANC-003 be equipped with a DTH hammer?
Yes. The manufacturer’s specifications list a DTH hammer as optional equipment and specify an air consumption range of 6–12 m³/min. The appropriate hammer model, drill rod connections, operating air pressure, and compressor capacity should be confirmed before ordering. A DTH hammer should not be assumed to be included in the standard equipment package.
05What information should I provide when requesting a quotation for the TD-RIG-ANC-003?
Please provide the required borehole diameter and depth, ground conditions, drilling inclination, available working space, and preferred drill rod size. If DTH drilling is required, include information about the intended hammer configuration and available compressed-air supply. Also specify whether drilling tools, accessories, or other optional equipment are needed so that the proposed configuration can be reviewed before quotation.
Related Products
Start Your Project
Connect with TitanDrill engineering experts for custom technical configurations and global quote response.