Technical Specifications
| Air Consumption | 6–12 m³/min |
| Drilling Diameter | 90–200 mm |
| DTH Hammer | Optional |
| Drilling Depth | 10–60 m |
| Drill Rod Size | Ø76 × 1500 mm / Ø89 × 1500 mm |
| Maximum Output Torque | 3,800 N·m |
| Maximum Feed Stroke | 1,800 mm |
| Maximum Pullback Force | 80 kN |
| Maximum Feed Force | 60 kN |
| Rated Hydraulic System Pressure | 16 MPa |
| Motor Power | 22 kW |
| Total Rig Weight | 980 kg |
| Rotation Speed | 0–80 rpm |
| Feed Unit Tilting Angle | −10°–95° |
Hydraulic Drilling Configuration & Key Features
Hydraulic Rotation and Power Configuration
The TD-RIG-ANC-006 features a full hydraulic drilling configuration with a 22 kW motor and a rated hydraulic system pressure of 16 MPa. The rotation system delivers a maximum output torque of 3,800 N·m with an adjustable rotation speed of 0–80 rpm. Compared with the TD-RIG-ANC-005 basic version, this model has a higher specified motor power and a wider rotation speed range, while retaining the same maximum output torque.
Drilling Diameter and Depth
The rig has a specified drilling diameter range of 90–200 mm and a drilling depth range of 10–60 m. These values provide reference parameters for evaluating the equipment against anchor drilling requirements. Actual drilling performance depends on ground conditions, drilling tools, and the selected operating configuration.
Drill Rod Configuration
The TD-RIG-ANC-006 supports Ø76 × 1500 mm and Ø89 × 1500 mm drill rods. The appropriate rod size and connection configuration should be confirmed according to the intended drilling diameter, drilling method, and compatible drilling tools.
Hydraulic Feed and Pullback System
The rig provides a maximum feed force of 60 kN, a maximum pullback force of 80 kN, and a maximum feed stroke of 1,800 mm. Compared with the TD-RIG-ANC-005 basic version, the specified feed force increases from 30 kN to 60 kN, while the pullback force increases from 50 kN to 80 kN. These values should be evaluated together with drill string requirements and ground conditions.
Extended Feed Unit Tilting Range
The feed unit has a specified tilting angle range of −10°–95°. This range allows the drilling assembly to be adjusted for different borehole orientations and equipment setups. The required drilling angle, installation arrangement, and available working space should be confirmed before selecting the rig.
Optional DTH Hammer Configuration
A DTH hammer is listed as optional equipment, with a specified air consumption range of 6–12 m³/min. The hammer model, drill rod connections, operating air pressure, and compressor capacity should be confirmed according to the intended drilling diameter and ground conditions. The DTH hammer should not be assumed to be included in the standard equipment package.
Anchor Drilling Applications & Operating Requirements
Anchor Borehole Drilling
The TD-RIG-ANC-006 is designed for anchor drilling operations requiring hydraulic rotation and feed. Its specified drilling diameter range of 90–200 mm and drilling depth range of 10–60 m provide reference parameters for evaluating the rig against project borehole requirements. Actual drilling performance depends on ground conditions, drilling tools, and the selected operating configuration.
Drilling Operations Requiring Higher Feed and Pullback Forces
The rig provides a maximum feed force of 60 kN and a maximum pullback force of 80 kN, compared with 30 kN and 50 kN respectively for the TD-RIG-ANC-005 basic version. These specifications may be relevant when evaluating projects with greater feed or drill string retrieval requirements. The required operating forces should be assessed according to the drilling method, drill string configuration, and ground conditions.
Drilling at Different Inclinations
The feed unit has a specified tilting angle range of −10°–95°, providing a wider adjustment range than the TD-RIG-ANC-005 basic version. Buyers should confirm the required borehole inclination, equipment installation arrangement, and available working space when evaluating the rig for drilling at different orientations.
Hydraulic Rotation and Drilling Tool Selection
With a maximum output torque of 3,800 N·m and an adjustable rotation speed of 0–80 rpm, the TD-RIG-ANC-006 provides a hydraulic rotation configuration for anchor drilling. The specified Ø76 × 1500 mm and Ø89 × 1500 mm drill rods should be matched with suitable drilling tools and compatible connections. The required torque, rotation speed, and drill string configuration should be reviewed before equipment selection.
Optional DTH Drilling Configuration
A DTH hammer is listed as optional equipment, with a specified air consumption range of 6–12 m³/min. For projects requiring DTH drilling, the hammer model, drill rod connections, operating air pressure, and compressor capacity should be confirmed according to the intended drilling diameter and ground conditions.
Project and Equipment Selection Considerations
Before selecting the TD-RIG-ANC-006, buyers should provide the required drilling diameter and depth, ground conditions, drilling inclination, available working space, and preferred drill rod size. The rig’s 22 kW motor, 3,800 N·m maximum output torque, 60 kN maximum feed force, 80 kN maximum pullback force, and 1,800 mm maximum feed stroke should be evaluated together with these requirements.
Frequently Asked Questions
01What drilling diameter and depth does the TD-RIG-ANC-006 support?
The TD-RIG-ANC-006 has a specified drilling diameter range of 90–200 mm and a drilling depth range of 10–60 m. These figures are based on the manufacturer’s published specifications. Actual drilling performance depends on ground conditions, drilling tools, and the selected operating configuration.
02How does the TD-RIG-ANC-006 differ from the TD-RIG-ANC-005 basic version?
The TD-RIG-ANC-006 has a specified motor power of 22 kW, maximum feed force of 60 kN, maximum pullback force of 80 kN, and rotation speed range of 0–80 rpm. The TD-RIG-ANC-005 basic version has corresponding specifications of 18.5 kW, 30 kN, 50 kN, and 0–60 rpm. Both models have the same maximum output torque of 3,800 N·m and the same specified drilling diameter and depth ranges. The appropriate model should be selected according to the complete drilling requirements rather than motor power alone.
03What are the feed, pullback, and tilting angle specifications of the TD-RIG-ANC-006?
The TD-RIG-ANC-006 provides a specified maximum feed force of 60 kN, maximum pullback force of 80 kN, and maximum feed stroke of 1,800 mm. Its feed unit has a tilting angle range of −10°–95°. These specifications should be evaluated together with the required drilling inclination, drill string configuration, equipment installation arrangement, and ground conditions.
04Can the TD-RIG-ANC-006 be equipped with a DTH hammer?
Yes. The manufacturer’s specifications list a DTH hammer as optional equipment and specify an air consumption range of 6–12 m³/min. The appropriate hammer model, drill rod connections, operating air pressure, and compressor capacity should be confirmed before ordering. A DTH hammer should not be assumed to be included in the standard equipment package.
05What information should I provide when requesting a quotation for the TD-RIG-ANC-006?
Please provide the required borehole diameter and depth, ground conditions, drilling inclination, available working space, and preferred drill rod size. If DTH drilling is required, include information about the intended hammer configuration and available compressed-air supply. Also specify whether drilling tools, accessories, or other optional equipment are required so that the proposed configuration can be reviewed before quotation.
Related Products
Start Your Project
Connect with TitanDrill engineering experts for custom technical configurations and global quote response.