Technical Specifications
| Specification | Value |
|---|---|
| Air Consumption | 6–12 m³/min |
| Drilling Diameter | 90–150 mm |
| DTH Hammer | Optional |
| Drilling Depth | 10–60 m |
| Drill Rod Size | Ø60 × 1000 mm / Ø76 × 1000 mm |
| Maximum Output Torque | 1,050 N·m |
| Maximum Feed Stroke | 1,200 mm |
| Maximum Pullback Force | 30 kN |
| Maximum Feed Force | 16 kN |
| Rated Hydraulic System Pressure | 16 MPa |
| Motor Power | 11 kW |
| Total Rig Weight | 370 kg |
| Rotation Speed | 0–80 rpm |
| Feed Unit Tilting Angle | 10°–90° |
Hydraulic Drilling Configuration & Key Features
Hydraulic Rotation and Feed
The TD-RIG-DTH-002 uses a hydraulic rotation and feed system with a rated hydraulic system pressure of 16 MPa. It is equipped with an 11 kW motor and provides an adjustable rotation speed of 0–80 rpm, with a maximum output torque of 1,050 N·m.
Drilling Capacity
The rig is specified for drilling diameters of 90–150 mm and drilling depths of 10–60 m. The actual drilling configuration should be selected according to the required borehole dimensions, ground conditions, and compatible DTH drilling tools.
Drill Rod Configuration
The published specifications list Ø60 × 1000 mm and Ø76 × 1000 mm drill rod sizes. The appropriate rod configuration should be confirmed together with the selected DTH hammer and drilling requirements.
Feed and Pullback Capability
The feed system provides a maximum feed stroke of 1,200 mm, a maximum feed force of 16 kN, and a maximum pullback force of 30 kN. These specifications should be considered when evaluating the rig for a particular drilling setup.
Adjustable Feed Unit
The feed unit has a specified tilting angle range of 10°–90°, allowing its position to be adjusted for different drilling arrangements. The achievable drilling position depends on the actual installation and site conditions.
Optional DTH Hammer
The DTH hammer is listed as optional equipment. Hammer selection and compatibility should be confirmed according to the required drilling diameter, drill rod configuration, and compressed-air supply.
DTH Drilling Applications & Operating Requirements
The TD-RIG-DTH-002 is designed for down-the-hole drilling operations requiring hydraulic rotation and feed control. With a specified drilling diameter range of 90–150 mm and drilling depth range of 10–60 m, the rig can be evaluated for projects within these borehole requirements.
DTH Borehole Drilling
The rig can be considered for DTH borehole drilling where the required hole diameter and depth fall within its published specifications. The appropriate DTH hammer, drill rods, and compressed-air supply should be selected according to the drilling conditions.
Drill Rod and Equipment Configuration
The published specifications list Ø60 × 1000 mm and Ø76 × 1000 mm drill rod sizes. This provides two listed rod configurations for equipment selection, subject to compatibility with the chosen DTH hammer and drilling setup.
Projects Requiring Adjustable Drilling Positions
With a specified feed unit tilting range of 10°–90°, the rig allows adjustment of the feed assembly for different drilling arrangements. Actual installation and drilling positions depend on the equipment setup and site conditions.
Equipment Selection Considerations
Before selecting the TD-RIG-DTH-002, buyers should confirm the required drilling diameter and depth, rock or ground conditions, available compressed-air supply, drill rod requirements, and installation space.
The rig is equipped with an 11 kW motor and has a maximum output torque of 1,050 N·m. These specifications should be evaluated alongside the complete drilling configuration rather than used alone to predict drilling performance.
Frequently Asked Questions
01What drilling diameter and depth does the TD-RIG-DTH-002 support?
The TD-RIG-DTH-002 has a specified drilling diameter range of 90–150 mm and a drilling depth range of 10–60 m. Actual drilling capability depends on ground conditions, the selected DTH hammer, drill rod configuration, and operating setup. Project requirements should be reviewed before confirming equipment suitability.
02What drill rod sizes are specified for the TD-RIG-DTH-002?
The published specifications list Ø60 × 1000 mm and Ø76 × 1000 mm drill rod sizes. The appropriate rod size should be confirmed according to the selected DTH hammer, connection requirements, and drilling configuration. The listing of both sizes does not establish compatibility with every hammer or connection type.
03What compressed-air supply is required for this DTH drilling rig?
The published air consumption range is 6–12 m³/min. The required compressor configuration depends on the selected DTH hammer and drilling conditions. Operating air pressure is not specified in the available product data and should be confirmed before selecting a compressor.
04Is a DTH hammer included with the TD-RIG-DTH-002?
The DTH hammer is listed as optional equipment in the product specifications. Hammer selection and compatibility should be confirmed during quotation, taking into account the required drilling diameter, drill rod size, and compressed-air supply. Buyers should confirm whether the hammer and other drilling tools are included in the quoted configuration.
05What information should I provide when requesting a quotation?
When requesting a quotation for the TD-RIG-DTH-002, please provide the required drilling diameter and depth, expected rock or ground conditions, available compressed-air supply, and preferred drill rod size if known. Please also indicate whether you require a DTH hammer or additional drilling tools. This information helps clarify equipment compatibility and the quotation scope.
Related Products
Start Your Project
Connect with TitanDrill engineering experts for custom technical configurations and global quote response.