Technical Specifications
| Drilling Diameter | 80–130 mm |
| Drilling Depth | 20 m |
| Rotation Speed | 90 rpm |
| Working Air Pressure | 0.5–0.8 MPa |
| Feed Stroke per Cycle | 1,000 mm |
| Air Consumption | <7 m³/min |
| Maximum Feed Force | 6,000 N |
| Motor Power | 4 kW |
Support-Mounted Drilling Configuration & Key Features
Support-Mounted DTH Drilling Configuration
The TD-RIG-DTH-005 is a support-mounted down-the-hole (DTH) drilling rig with a specified motor power of 4 kW. Its support-mounted arrangement should be evaluated according to the intended drilling setup, installation conditions, and available working space. Mounting dimensions and specific installation requirements should be confirmed before equipment selection.
80–130 mm Drilling Diameter and 20 m Depth
The rig has a specified drilling diameter range of 80–130 mm and a drilling depth of 20 m. These parameters provide a basis for assessing the equipment against project borehole requirements. Actual drilling performance depends on ground conditions, drilling tools, and the operating configuration.
Motor Power and Rotation Speed
The TD-RIG-DTH-005 is specified with a 4 kW motor and a rotation speed of 90 rpm. These values should be considered together with the selected drilling tools and required borehole dimensions. Maximum output torque and a variable rotation-speed range are not stated in the available specifications.
Feed Force and Stroke
The published specifications list a maximum feed force of 6,000 N and a feed stroke of 1,000 mm per cycle. Both parameters are relevant when assessing the proposed drilling arrangement and operating requirements. The available data does not specify additional feed-control functions or pullback force.
Compressed-Air Operating Requirements
The rig has a specified working air pressure of 0.5–0.8 MPa and air consumption below 7 m³/min. Buyers should evaluate the available compressed-air supply together with the requirements of the intended DTH hammer and drilling tools. Compressor suitability and tool compatibility should be confirmed for the proposed configuration.
DTH Drilling Applications & Operating Requirements
80–130 mm DTH Borehole Drilling
The TD-RIG-DTH-005 can be considered for down-the-hole drilling projects requiring borehole diameters of 80–130 mm and a specified drilling depth of 20 m. These dimensions provide an initial basis for evaluating the rig against project requirements. Actual drilling performance depends on ground conditions, drilling tools, and operating conditions.
Support-Mounted Drilling Installations
The rig’s support-mounted configuration requires consideration of the intended installation arrangement, available working space, and drilling orientation. Before selecting the equipment, buyers should confirm the mounting requirements and whether the proposed setup is suitable for the project site. Specific mounting dimensions and supported drilling angles are not stated in the available specifications.
Compressed-Air Supply and Drilling Tool Selection
The published specifications list a working air pressure of 0.5–0.8 MPa and air consumption below 7 m³/min. These parameters should be considered when selecting a compressed-air supply and evaluating the intended DTH drilling tools. Compressor capacity, hammer requirements, and connection compatibility should be confirmed for the proposed operating configuration.
Project Requirements and Equipment Selection
Buyers evaluating the TD-RIG-DTH-005 should provide the required borehole diameter and depth, ground conditions, drilling orientation, available mounting arrangement, and compressed-air supply details. The rig’s 4 kW motor, 90 rpm rotation speed, 6,000 N maximum feed force, and 1,000 mm feed stroke per cycle should be assessed together with these project requirements. Additional configuration details should be confirmed before ordering.
Frequently Asked Questions
01What drilling diameter and depth does the TD-RIG-DTH-005 support?
The TD-RIG-DTH-005 has a specified drilling diameter range of 80–130 mm and a drilling depth of 20 m. These figures are based on the published product specifications. Actual drilling performance depends on ground conditions, drilling tools, and the selected operating configuration.
02What installation requirements should be considered for this support-mounted DTH drilling rig?
Buyers should confirm the intended mounting arrangement, available working space, required drilling orientation, and site conditions. The TD-RIG-DTH-005 uses a support-mounted configuration, but specific mounting dimensions and supported drilling angles are not stated in the available specifications. These details should be confirmed before ordering.
03What compressed-air supply does the TD-RIG-DTH-005 require?
The published specifications list a working air pressure of 0.5–0.8 MPa and air consumption below 7 m³/min. These figures should be evaluated together with the air requirements of the selected DTH hammer and drilling tools. Compressor suitability should be confirmed for the complete drilling configuration.
04What are the motor power, rotation speed, and feed specifications of this rig?
The TD-RIG-DTH-005 has a specified motor power of 4 kW, rotation speed of 90 rpm, maximum feed force of 6,000 N, and feed stroke of 1,000 mm per cycle. Maximum output torque, pullback force, and a variable rotation-speed range are not stated in the available specifications.
05What information should I provide when requesting a quotation for the TD-RIG-DTH-005?
Please provide the required drilling diameter and depth, ground conditions, drilling orientation, intended mounting arrangement, and available compressed-air supply. If DTH hammers, drill rods, or other accessories are required, include the preferred specifications and any available connection details. This information will help assess equipment suitability and clarify the proposed supply configuration.
Related Products
Start Your Project
Connect with TitanDrill engineering experts for custom technical configurations and global quote response.