Technical Specifications
| Drilling Diameter | 80–130 mm |
| Drilling Depth | ≤60 m |
| Rotation Speed | 0–78 rpm |
| Working Air Pressure | 0.7–1.0 MPa |
| Drill Rod Specification | Ø60 × 1,000 mm |
| Air Consumption | 100–150 L/s |
| Maximum Feed Force | 9,600 N |
| Electric Motor Power | 5.5 kW |
Support-Mounted Drilling Configuration & Key Features
Support-Mounted DTH Drilling Configuration
The TD-RIG-DTH-007 is a support-mounted down-the-hole (DTH) drilling rig equipped with a 5.5 kW electric motor. Its support-mounted configuration should be evaluated according to the intended installation arrangement, available working space, and drilling orientation. Specific mounting dimensions and supported drilling angles are not stated in the available specifications.
80–130 mm Drilling Diameter and Up to 60 m Depth
The rig has a specified drilling diameter range of 80–130 mm and a maximum drilling depth of 60 m. These parameters provide a reference for evaluating the equipment against project borehole requirements. Actual drilling performance depends on ground conditions, drilling tools, and operating conditions.
Electric Motor and Rotation Speed
The TD-RIG-DTH-007 has a specified electric motor power of 5.5 kW and a rotation speed range of 0–78 rpm. These values should be considered together with the intended drilling diameter and drilling tools. Maximum output torque and rotation-speed characteristics under specific drilling loads are not provided in the available specifications.
Drill Rod Specification and Feed Force
The published specifications list a drill rod size of Ø60 × 1,000 mm and a maximum feed force of 9,600 N. These parameters are relevant when evaluating the drill string configuration and operating requirements. The 1,000 mm dimension refers to the specified drill rod length, not a confirmed feed stroke.
Compressed-Air Operating Requirements
The rig has a specified working air pressure of 0.7–1.0 MPa and air consumption of 100–150 L/s. These values should be considered when evaluating the compressed-air supply for the intended drilling arrangement. Compressor suitability and compatibility with the selected DTH hammer and drilling tools should be confirmed before ordering.
DTH Drilling Applications & Equipment Selection
80–130 mm DTH Borehole Drilling
The TD-RIG-DTH-007 can be evaluated for down-the-hole drilling projects requiring borehole diameters of 80–130 mm and depths of up to 60 m. These specifications provide an initial reference for matching the rig to project borehole requirements. Actual drilling performance depends on ground conditions, drilling tools, and the selected operating configuration.
Support-Mounted Drilling Installations
The rig’s support-mounted configuration requires consideration of the available installation space, mounting arrangement, and intended drilling orientation. Buyers should confirm the proposed equipment setup against site conditions before ordering. Specific mounting dimensions and supported drilling angles are not stated in the available specifications.
Drill Rod Configuration and Drilling Tool Selection
The published specifications identify a drill rod size of Ø60 × 1,000 mm and a maximum feed force of 9,600 N. Buyers should review the proposed drill string arrangement, connection requirements, and compatibility with the intended DTH hammer and drilling tools. The specified drill rod length should not be interpreted as the rig’s feed stroke, which is not provided in the available technical data.
Compressed-Air Supply and Project Requirements
The TD-RIG-DTH-007 has a specified working air pressure of 0.7–1.0 MPa and air consumption of 100–150 L/s. These parameters should be considered when evaluating the compressed-air supply for the intended drilling configuration. Before requesting a quotation, buyers should provide the required drilling diameter and depth, ground conditions, drilling orientation, available mounting arrangement, and compressor specifications. Compressor and drilling-tool compatibility should be confirmed for the complete operating setup.
Frequently Asked Questions
01What drilling diameter and depth does the TD-RIG-DTH-007 support?
The TD-RIG-DTH-007 has a specified drilling diameter range of 80–130 mm and a maximum drilling depth of 60 m. Actual drilling performance depends on ground conditions, drilling tools, and the selected operating configuration. The 60 m figure represents the published maximum drilling depth rather than a guaranteed depth under all conditions.
02What drill rod specification is listed for the TD-RIG-DTH-007?
The published specifications list a drill rod size of Ø60 × 1,000 mm. The 1,000 mm dimension refers to the specified drill rod length, not the rig’s feed stroke. Drill rod connections and compatibility with the intended DTH hammer should be confirmed before ordering.
03What compressed-air supply is required for the TD-RIG-DTH-007?
The TD-RIG-DTH-007 has a specified working air pressure of 0.7–1.0 MPa and air consumption of 100–150 L/s. These figures should be evaluated together with the air requirements of the selected DTH hammer and drilling tools. Compressor suitability should be confirmed for the complete drilling configuration.
04What motor and rotation specifications does this rig have, and what should be checked before installation?
The TD-RIG-DTH-007 is equipped with a 5.5 kW electric motor and has a specified rotation speed range of 0–78 rpm. Its maximum feed force is 9,600 N. Before installation, buyers should confirm the intended mounting arrangement, available working space, and required drilling orientation. Specific mounting dimensions and supported drilling angles are not stated in the available specifications.
05What information should I provide when requesting a quotation for the TD-RIG-DTH-007?
Please provide the required drilling diameter and depth, ground conditions, drilling orientation, intended mounting arrangement, and available electrical and compressed-air supply specifications. If drill rods, DTH hammers, or other accessories are required, include the preferred specifications and connection details. This information will help assess equipment suitability and clarify the proposed supply configuration.
Related Products
Start Your Project
Connect with TitanDrill engineering experts for custom technical configurations and global quote response.